05-10 Super Duty weld on High Steer Kit
Our 05-10 super duty weld on high steer kit is specifically designed to seamlessly integrate with our Tacoma solid axle kit, removing any guess work when it comes to setting everything up. Our drag link mounting location ensures that your steering is perfectly aligned with your panhard bar, resulting in minimal bump steer and no negative feedback on the steering wheel. The tie rod is strategically positioned forward, allowing for the use of a standard heim joint without the need for offset heims. For maximum strength, our high steer kit utilizes a 3/4" grade 8 bolt that goes through the stock steering knuckle and aligns everything before welding. This kit is designed to work with 7/8 heim joints using a 3/4" bolt
Included in kit:
-Driver and Passenger high steer plates,
-Sleeves for steering bolt to go through
-2) 3/4” grade 8 bolts to bolt kit to stock steering knuckle
-All brackets are laser cut and CNC bent for the best dimensional accuracy possible
PLEASE NOTE: This is a weld on kit that requires knowledge of welding mild steel plate to cast iron. Make sure to educate yourself on the process or have a professional weld them on for you.
DISCLAIMER
All products developed and created by MarTec LLC are intended for off-road use only and hold no warranty.
Our 05-10 super duty weld on high steer kit is specifically designed to seamlessly integrate with our Tacoma solid axle kit, removing any guess work when it comes to setting everything up. Our drag link mounting location ensures that your steering is perfectly aligned with your panhard bar, resulting in minimal bump steer and no negative feedback on the steering wheel. The tie rod is strategically positioned forward, allowing for the use of a standard heim joint without the need for offset heims. For maximum strength, our high steer kit utilizes a 3/4" grade 8 bolt that goes through the stock steering knuckle and aligns everything before welding. This kit is designed to work with 7/8 heim joints using a 3/4" bolt
Included in kit:
-Driver and Passenger high steer plates,
-Sleeves for steering bolt to go through
-2) 3/4” grade 8 bolts to bolt kit to stock steering knuckle
-All brackets are laser cut and CNC bent for the best dimensional accuracy possible
PLEASE NOTE: This is a weld on kit that requires knowledge of welding mild steel plate to cast iron. Make sure to educate yourself on the process or have a professional weld them on for you.
DISCLAIMER
All products developed and created by MarTec LLC are intended for off-road use only and hold no warranty.
Our 05-10 super duty weld on high steer kit is specifically designed to seamlessly integrate with our Tacoma solid axle kit, removing any guess work when it comes to setting everything up. Our drag link mounting location ensures that your steering is perfectly aligned with your panhard bar, resulting in minimal bump steer and no negative feedback on the steering wheel. The tie rod is strategically positioned forward, allowing for the use of a standard heim joint without the need for offset heims. For maximum strength, our high steer kit utilizes a 3/4" grade 8 bolt that goes through the stock steering knuckle and aligns everything before welding. This kit is designed to work with 7/8 heim joints using a 3/4" bolt
Included in kit:
-Driver and Passenger high steer plates,
-Sleeves for steering bolt to go through
-2) 3/4” grade 8 bolts to bolt kit to stock steering knuckle
-All brackets are laser cut and CNC bent for the best dimensional accuracy possible
PLEASE NOTE: This is a weld on kit that requires knowledge of welding mild steel plate to cast iron. Make sure to educate yourself on the process or have a professional weld them on for you.
DISCLAIMER
All products developed and created by MarTec LLC are intended for off-road use only and hold no warranty.