Fabricated Trailing Arms
Derived from our trailing arm kits, we are offering our fabricated trailing arms for purchase by themselves. Constructed from 2” .25” thick tubing and a mix of 3/16” & 1/4” mild steel plate. Trailing arms are mig welded. These arms use a 1.25” heim joint at the chassis side and a 1” uniball at the axle size. Shock mount eyelet is 7/8” below the centerline of the trailing arm, eliminating the need for any type of bushing or wobble stopper. Available in custom sizes, call for more info.
Dimensions: 42.5” eye to eye
Distance from chassis side pivot to shock eyelet: 34.5”
Distance from shock eyelet to axle side pivot: 8”
Shock mounting width: 1.5”
Included with purchase:
-2 Fabricated trailing arms
-2 1.25” heims
-2 1” uniballs
-8 Misalignment spacers for 3/4” bolts
-4 3/4” grade 8 bolts
-2 1/2” shock bolts
DISCLAIMER
All products developed and created by MarTec LLC are intended for off-road use only and hold no warranty.
Derived from our trailing arm kits, we are offering our fabricated trailing arms for purchase by themselves. Constructed from 2” .25” thick tubing and a mix of 3/16” & 1/4” mild steel plate. Trailing arms are mig welded. These arms use a 1.25” heim joint at the chassis side and a 1” uniball at the axle size. Shock mount eyelet is 7/8” below the centerline of the trailing arm, eliminating the need for any type of bushing or wobble stopper. Available in custom sizes, call for more info.
Dimensions: 42.5” eye to eye
Distance from chassis side pivot to shock eyelet: 34.5”
Distance from shock eyelet to axle side pivot: 8”
Shock mounting width: 1.5”
Included with purchase:
-2 Fabricated trailing arms
-2 1.25” heims
-2 1” uniballs
-8 Misalignment spacers for 3/4” bolts
-4 3/4” grade 8 bolts
-2 1/2” shock bolts
DISCLAIMER
All products developed and created by MarTec LLC are intended for off-road use only and hold no warranty.
Derived from our trailing arm kits, we are offering our fabricated trailing arms for purchase by themselves. Constructed from 2” .25” thick tubing and a mix of 3/16” & 1/4” mild steel plate. Trailing arms are mig welded. These arms use a 1.25” heim joint at the chassis side and a 1” uniball at the axle size. Shock mount eyelet is 7/8” below the centerline of the trailing arm, eliminating the need for any type of bushing or wobble stopper. Available in custom sizes, call for more info.
Dimensions: 42.5” eye to eye
Distance from chassis side pivot to shock eyelet: 34.5”
Distance from shock eyelet to axle side pivot: 8”
Shock mounting width: 1.5”
Included with purchase:
-2 Fabricated trailing arms
-2 1.25” heims
-2 1” uniballs
-8 Misalignment spacers for 3/4” bolts
-4 3/4” grade 8 bolts
-2 1/2” shock bolts
DISCLAIMER
All products developed and created by MarTec LLC are intended for off-road use only and hold no warranty.