2005+ Tacoma rear shock relocation kit
These shock towers allow you to run a 2.5x12” or 2.5x14” shock under your bed without intruding into your bed space. Comes with 2) shock towers, 2) axle side shock brackets for a toyota axle housing, 4) Shock reservoir mounts, 4) clamps and 4) 1/2-20 Grade 8 shock bolts. Shock towers are laser cut 3/16 mild steel plate, Axle side shock tabs are 1/4 mild steel. Designed for the 2nd & 3rd gen Tacoma with both the 5 & 6 foot beds. PLEASE NOTE: This kit requires the use of a 1.25”-1.75” wheel spacer depending on wheel offset.
Designed to run a smooth body shock with a straight reservoir hose fitting. Shock length to be determined by amount of lift and desired amount of travel. Part Numbers for shocks below:
Fox 2.5x12 Fox 980-02-102
Fox 2.5x14 Fox 980-02-103
King 2.5x12 King PR2512-ss
King 2.5x14 King PR2514-ss
These shock towers allow you to run a 2.5x12” or 2.5x14” shock under your bed without intruding into your bed space. Comes with 2) shock towers, 2) axle side shock brackets for a toyota axle housing, 4) Shock reservoir mounts, 4) clamps and 4) 1/2-20 Grade 8 shock bolts. Shock towers are laser cut 3/16 mild steel plate, Axle side shock tabs are 1/4 mild steel. Designed for the 2nd & 3rd gen Tacoma with both the 5 & 6 foot beds. PLEASE NOTE: This kit requires the use of a 1.25”-1.75” wheel spacer depending on wheel offset.
Designed to run a smooth body shock with a straight reservoir hose fitting. Shock length to be determined by amount of lift and desired amount of travel. Part Numbers for shocks below:
Fox 2.5x12 Fox 980-02-102
Fox 2.5x14 Fox 980-02-103
King 2.5x12 King PR2512-ss
King 2.5x14 King PR2514-ss
These shock towers allow you to run a 2.5x12” or 2.5x14” shock under your bed without intruding into your bed space. Comes with 2) shock towers, 2) axle side shock brackets for a toyota axle housing, 4) Shock reservoir mounts, 4) clamps and 4) 1/2-20 Grade 8 shock bolts. Shock towers are laser cut 3/16 mild steel plate, Axle side shock tabs are 1/4 mild steel. Designed for the 2nd & 3rd gen Tacoma with both the 5 & 6 foot beds. PLEASE NOTE: This kit requires the use of a 1.25”-1.75” wheel spacer depending on wheel offset.
Designed to run a smooth body shock with a straight reservoir hose fitting. Shock length to be determined by amount of lift and desired amount of travel. Part Numbers for shocks below:
Fox 2.5x12 Fox 980-02-102
Fox 2.5x14 Fox 980-02-103
King 2.5x12 King PR2512-ss
King 2.5x14 King PR2514-ss